Basketball Hoop Installation

Basketball Hoop Installation

You Purchased a Basketball Hoop and now you need our Basketball Hoop Installation and Assembly Service. No problem, this is one of specialties. We install and assemble in-ground basketball hoops only. We do not assemble the portable units.

In-ground Basketball Hoop Installation with Assembly is a 2 part project. Part one includes the ground work which includes putting a cement foundation slab in the ground to support the basketball pole. This requires a 3-4 ft hole to be dug out, approximately 20” x 20” in square measurement. Next the concrete work must be completed. This process calls for 700 to 900 lbs of concrete for the slab. That’s a lot of concrete and probably why you are considering this service. Part 2 starts about 36 hours later and includes the assembly of the pole and attachment to the foundation. Following includes the assembly and attachment of the goal.

Goalrilla Basketball Hoop Installation

Goalrilla basketball hoops use welded, ultra-wide span arms and a welded steel board frame (a proven design inspired by earlier Goalrilla basketball systems) to create an unobstructed, clear view and consistent rebound across the glass. Built Goalrilla tough, the unit is capable of handling over 1000 lbs. of vertical torque to the rim. It can take on anything the suburbs can throw at it. It’s pure Goalrilla through and through.

 

Goalrilla Basketball Hoop Installation
Goalrilla Basketball Hoop Installation

 

Lifetime Basketball Hoop Installation

This Lifetime Bolt-Down 60″ Crank Adjust System has a 4″ hard square pole that bolts down and comes with a two (2) piece pole, Crank Adjust, 6 mm tempered glass backboard, Slam-It Ultra rim, and a max backboard offset of 2.5 ft. The tempered glass will help you bring the arena home. Its professional look and feel is sure to impress.

 

Lifetime Basketball Hoop Installation
Lifetime Basketball Hoop Installation